Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

11.06.2025 05:03

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

so, what happens?

This one hit behind the barn.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

What Happened at Pitchfork’s Zine Launch With Turnstile - Pitchfork

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

Now when you have a certain ac resistance, then a current flows in a loop.

The third is lightning and “how it gets conducted into a home.”

Early visions of Mars: Meet the 19th-century astronomer who used science fiction to imagine the red planet - The Conversation

This is 'the assistant's answer'

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

For this case there are devices called Metal oxide varistors (MOV).

Why do liberals think it is okay to steal votes while the rest of us obey the law(s)?

The bolt then partially travels down the line to your home.

In schematic diagrams this is the symbol for a fuse:

It seems Mohan does not understand the difference between a comment and an Answer.

The Sun Is Causing Starlink Satellites To Drop From Space - Daily Kos

But… the neutral is now “floating” because of the 1 ohm resistance.

First Sentence:

2024–10–16 [ OO OLAOYE OYEBODE ]

How to Watch Tonight's NBA Finals Indiana Pacers vs. Oklahoma City Thunder Game 1 for Free - CNET

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

The MOV will conduct when the voltage exceeds 50% of line voltage.

An AC voltage/ current source, and an ac inductive load.

'Mission: Impossible 8': Inside How They Shot Underwater Submarine - IndieWire

A fuse is a non-resetable over current circuit protector.

[old diagram got deleted by accident]

(Dc diagram shown, AC is similar).

Adopting the MIND Diet May Lower Dementia Risk at Any Age - Neuroscience News

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

These are simplified answers to the original question, and does not change anything I wrote above.

2 Years of Exercise Reversed 20 Years of Aging in the Heart: Longest-Ever Randomized Trial on Exercise - Good News Network

Edit 2024–10.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

Do you anal play alone?

At least they know the answer if they wanted it.

At one ohm, the resistor has a maximum of 1 watt power.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

Is a monthly salary of 47,000 SEK before tax considered adequate for a C# .Net developer with over 7 years of experience in Sweden?

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

what exactly is a ‘surge’ protector?

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

These devices are installed between the “hot” and “neutral” and protective ground.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

I post the exact comment here.

One

eight

but this device (an Inductor) … impedes the rapid changes in the current.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

So, the voltage could go up to 500 volts, and the fuse will not open up.

It also is a device that limits the change in current flow.

2024–10–14 [Omar Gharbi Omar Gharbi ]

What is lightning?

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

nine

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

[image of Common-mode choke]

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

Upvotes:

but I think this circuit , shows a few more pieces.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

the problem then depends on "how fast does the fuse operate?".

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

2024–10–10[John johnson John Johnson ]

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

This is where the MOV conducts again, and dissipated the energy.

There are three different concepts here that are getting confused.

Barnstars:

The other is “what does a “fuse” do?”

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

There are two important concepts here.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

He then describes Rainy Season and Lightning.

Because the load is inductive, the current lags the voltage.(by a bit).

A circuit breaker is similar, but is resettable.

But it can get overloaded, and no longer works.

He then asserts :

Here is a simplified AC power diagram.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

This is where this question deviates from being a 'generic' question, and becomes more specific.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

One is “what exactly is in a ‘surge protector’ ? ”

This is the picture of an electronic coil of wire wound around a core of magnetic material.

What does a fuse do?

a photo is worth a thousand words.

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

This device then solves the entire problem.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

He then describes the function of a fuse.